Announcements‎ > ‎

Spektrum DX8 Gimbal Bulletin

posted Aug 29, 2011, 9:12 AM by Higgins Field
Spektrum Product Development has been investigating reports from DX8 transmitter customers experiencing servo movements inconsistent with corresponding transmitter stick input.
As a precautionary measure, Horizon Hobby would like DX8 customers to perform the Monitor Test to examine Gimbal controls over the entire range of each axis of input. Expected results for the Monitor Test should show smooth tracking with corresponding stick input. If the Monitor "jumps", hesitates, or is seen in a channel other than what is being tested, please follow the Monitor Test instructions below to test DX8 Gimbal movement:

Monitor Test:

Step 1: Turn on power switch. Ensure left stick position (throttle) is low and Flap/Gyro switch is in position 0 or all the way up.

Step 2: Press the roller to enter the Function List menu.

Step 3: Using the roller, scroll to the bottom of the Function List menu and depress roller to select Monitor function.

Step 4: Note the position of the Aileron (AIL) and Rudder (RUD) positions. Ensure all trims are centered and sub-trims are zero before continuing to Step 5.

Step 5: Move the Throttle (Left side) and Elevator (Right side) gimbals up and down being very careful not to touch the control sticks. While moving the gimbals up and down, note the AIL and RUD positions on the Monitor.

ONLY touch the Gimbal on the outer frame where shown, being very careful not to move the stick as this will falsify the test.

Step 6: If the percentage for the Aileron or Rudder changes by more than 3%, follow the instructions for sending your DX8 transmitter in for inspection. 

DX8 Transmitter Service Request:

· Click HERE to complete the Transmitter Service Request Form.
· Horizon will pay for ground shipping within the United States and Canada.
· If you purchased your product outside the US and Canada, contact your local retailer or distributor. A list of International distributors may be found HERE.
· If you have further questions in the United States, please call Horizon Hobby Product Support at 877-504-0233.

We apologize for this inconvenience. Horizon disclaims all liability and warranties for any consumer failing to act upon thi